中文版
Home Material DIN 1654-5-1989
简体 | 繁體
Grade X2CrNiMoN 17 13 3
Germany W-Nr. 1.4429
Corresponding Standard DIN 1654-5-1989
Cold heading and Cold Extruding Steels Technical Delivery Conditions for Stainless Steels
Classification Austenitic Stainless Steel
X2CrNiMoN 17 13 3 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Mo N
Minimum Value - - - - - 16.5 12 2.5 0.14
Maximum Value 0.03 1 2 0.045 0.03 18.5 14.5 3 0.22
X2CrNiMoN 17 13 3 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Reduction of Area
ψ
% 		Impact Energy Absorption
KV2
J
Steel quenching or quenching + peeling ≤780 ≥55
Steel Cold draw + quenching ≤780 ≥55
Steel Cold draw + quenching + slightly cold redraw (K+GKZ+K) ≤840 ≥55
Steel quenching 580~800 ≥295 ≥40 ≥60
New and Old Grade Replacement List
Corresponding Standard Grade
DIN 1654-5-1989
Grade
Germany W-Nr.
DIN EN 10263-5-2002
Grade
Germany W-Nr.
DIN EN 10263-5-2018
Grade
Germany W-Nr.
Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
022Cr17Ni12Mo2N
(00Cr17Ni13Mo2N) 		S31653 316LN SUS 316LN STS 316LN 316LN S31653 X2CrNiMoN 17-12-2
X2CrNiMoN 17-11-2 		X2CrNiMoN 17-13-3
(X2CrNiMoN 18-13) 		1.4429 Z2CND 17-13Az
Z3CND 17-12Az 		X2CrNiMoN 17-13-3
X2CrNiMoN 17-12-2 		1.4429
1.4406 		2375 316S63
316S61

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!