C15C 1.0234 - DIN EN 10263-2-2002

Grade	C15C
Germany W-Nr.	1.0234
Corresponding Standard	DIN EN 10263-2-2002 Steel Rod,bars and Wire for Cold Heading and Cold Extrusion - Part 2: Technical Delivery Conditions for Steels Not Intended for Heat Treatment after Cold Working
Classification	Carbon Steel
Properties	Good Forgability

C15C Chemical Element Composition Content (%)

Component	C	Si ^①	Mn	P	S	Al ^②
Minimum Value	0.13	-	0.35	-	-	0.02
Maximum Value	0.17	0.1	0.6	0.025	0.025	0.06

C15C Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
5＜d≤100	+U or +U+PE	≤460	≥58
5＜d≤100	+AC or AC+PE	≤400	≥68
5＜d≤10	+U+C	≤550	≥56
10＜d≤40	+U+C	≤540	≥56
2＜d≤5	+U+C+AC	≤390	≥70
5＜d≤40	+U+C+AC	≤380	≥70
2＜d≤5	+U+C+AC+LC	≤430	≥66
5＜d≤40	+U+C+AC+LC	≤420	≥66
5＜d≤10 ()	+AC+C	≤490	≥63
10＜d≤40	+AC+C	≤480	≥63

New and Old Grade Replacement List

1 Approximate Comparison Table Cold Heading Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Russia

United Kingdom

ISC

CNS

JIS

ASTM/AISI

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

GOST

BS EN/BS

ML15

U40152

SWRCH15K

1015

G10150

CC15A
(A4Al)

QSt38-3
(C14C)
Cq15
(C15C)

1.0234
-
1.1132

FR15
FB18
FR18

15пс

0/3

2 Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	South Korea	United States	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	JIS	KS	ASTM/AISI	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
15	S15C	STKM12B	1015	C15E4	C15C	1.0234	C15C	15	C15C

C15C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!