C4C 1.0303 - DIN EN 10263-2-2002

Grade	C4C
Germany W-Nr.	1.0303
Corresponding Standard	DIN EN 10263-2-2002 Steel Rod,bars and Wire for Cold Heading and Cold Extrusion - Part 2: Technical Delivery Conditions for Steels Not Intended for Heat Treatment after Cold Working
Classification	Carbon Steel
Properties	Good Forgability

C4C Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Al ^*
Minimum Value	0.02	-	0.25	-	-	0.02
Maximum Value	0.06	0.1	0.4	0.02	0.025	0.06

C4C Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
5＜d≤100	+U or +U+PE	≤390	≥70
5＜d≤100	+AC or AC+PE	≤330	≥75
5＜d≤10	+U+C	≤470	≥66
10＜d≤40	+U+C	≤460	≥66
2＜d≤5	+U+C+AC	≤320	≥77
5＜d≤10	+U+C+AC	≤310	≥77
10＜d≤40	+U+C+AC	≤300	≥77
5＜d≤10	+U+C+AC+LC	≤360	≥73
10＜d≤40	+U+C+AC+LC	≤350	≥73
5＜d≤10	+AC+C	≤410	≥70
10＜d≤40	+AC+C	≤400	≥70

New and Old Grade Replacement List

C4C Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!