GX25CrNiSi20-14 1.4832 - DIN EN 10295-2003

Grade	GX25CrNiSi20-14
Germany W-Nr.	1.4832
Corresponding Standard	DIN EN 10295-2003 Heat Resistant Steel Castings
Classification	Cast Steel
Density	7.8 g/cm³

GX25CrNiSi20-14 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^*	Mo	W ^*	V ^*	Nb ^*	Co ^*
Minimum Value	0.15	0.5	-	-	-	19	13	-	-	-	-	-	-
Maximum Value	0.35	2.5	2	0.04	0.03	21	15	0.25	0.5	0.6	0.12	0.6	1

GX25CrNiSi20-14 Mechanical Properties

condition	Test Temperature	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
cast steel	Room Temperature	≥450	≥230	≥10
cast steel	600°C		Creep Strength for 1%-10000h 82
cast steel	700°C		Creep Strength for 1%-10000h 46
cast steel	800°C		Creep Strength for 1%-10000h 23
cast steel	900°C		Creep Strength for 1%-10000h 10

Approximate Comparison Table Heat-Resistant Cast Steels and Alloys

China		Japan	International Organization for Standardization	Germany		France	Russia	United Kingdom
GB	ISC	JIS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
ZG25Cr20Ni14Si2	C53821	SCH 32	GX25CrNiSi20-14	GX25CrNiSi20-14	1.4832	GX25CrNiSi20-14	20Х20Н14С2Л	GX25CrNiSi20-14

GX25CrNiSi20-14 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!