ERNi-1 N02061 - ASME SFA-5.14/SFA-5.14M-2025

Grade	ERNi-1
	N02061
Corresponding Standard	ASME SFA-5.14/SFA-5.14M-2025 Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
Classification	Nickel and Nickel Alloys

ERNi-1 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Ni ^*	Cu	Ti	Al	Other Total
Minimum Value	-	-	-	-	-	-	93	-	2	-	-
Maximum Value	1	0.15	0.75	1	0.03	0.015	-	0.25	3.5	1.5	0.5

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

*Includes incidental cobalt.
•MIL-E-21562 grade; Pb < 0.010. “Other Elements Total” shall include Pb, Sn, Zn.

ERNi-1 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa
As-welded	380

1 Approximate Comparison Table Wrought Corrosion-Resistant Alloy for Welding

China		United States	International Organization for Standardization
GB	ISC	UNS	ISO
HNS 5206 NiTi 3	W 55206	N 02061	SNi 2061

2 Approximate Comparison Table Covered Electrode

Japan	United States	Germany	European Standard		United Kingdom
JIS	ASTM	W-Nr.	EN	Numerical Grade	BS EN/BS
DNi-1 YNi-1	ENi-1 ERNi-1	2.4155 2.4156	NiTi3	Ni2061	NA32

ERNi-1 Corresponding Standards(Same grade name, different standards)

1	GB /T 15620-2008
	(ERNi-1) SNi2061 NiTi3
2	ASME SFA-5.14/SFA-5.14M-2025
	ERNi-1 N02061

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!