ERNiCu-7 N04060 - ASME SFA-5.14/SFA-5.14M-2025

Grade	ERNiCu-7
	N04060
Corresponding Standard	ASME SFA-5.14/SFA-5.14M-2025 Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
Classification	Nickel and Nickel Alloys

ERNiCu-7 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Ni ^*	Ti	Al	Other Total	More
Minimum Value	-	-	-	-	-	-	62	1.5	-	-	Cu: Rem
Maximum Value	2.5	0.15	1.25	4	0.02	0.015	69	3	1.25	0.5	Cu: Rem

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

*Includes incidental cobalt.
•MIL-E-21562 grade; Pb < 0.010. “Other Elements Total” shall include Pb, Sn, Zn.

ERNiCu-7 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa
As-welded	490

1 Approximate Comparison Table Wrought Corrosion-Resistant Alloy for Welding

China		United States	International Organization for Standardization
GB	ISC	UNS	ISO
HNS 6406 NiCu30Mn3Ti	W 56406	N 04060	SNi 4060

2 Approximate Comparison Table Covered Electrode

Japan	United States	Germany	European Standard		United Kingdom
JIS	ASTM	W-Nr.	EN	Numerical Grade	BS EN/BS
DNiCu-7 YNiCu-7	ENiCu-7 ERNiCu-7	2.4366 2.4377	NiCu30Mn3Ti	Ni4060	NA33

ERNiCu-7 Corresponding Standards(Same grade name, different standards)

1	GB /T 15620-2008
	(ERNiCu-7) SNi4060 NiCu30Mn3Ti
2	ASME SFA-5.14/SFA-5.14M-2025
	ERNiCu-7 N04060

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!