ERNiCrFe-6 N07092 - ASME SFA-5.14/SFA-5.14M-2025

Grade	ERNiCrFe-6
	N07092
Corresponding Standard	ASME SFA-5.14/SFA-5.14M-2025 Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
Classification	Nickel and Nickel Alloys

ERNiCrFe-6 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni ^*	Cu	Ti	Other Total
Minimum Value	-	-	-	2	-	-	14	67	-	2.5	-
Maximum Value	8	0.08	0.35	2.7	0.03	0.015	17	-	0.5	3.5	0.5

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

*Includes incidental cobalt.
•MIL-E-21562 grade; Pb < 0.010. “Other Elements Total” shall include Pb, Sn, Zn.

ERNiCrFe-6 Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa
As-welded	550

ERNiCrFe-6 Corresponding Standards(Same grade name, different standards)

1	GB /T 15620-2008
	(ERNiCrFe-6) SNi7092 NiCr15Ti3Mn
2	ASME SFA-5.14/SFA-5.14M-2025
	ERNiCrFe-6 N07092

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!