23MnB4 1.5535 - EN 10269-2013

Grade	23MnB4
European Standard Steel Grade	1.5535
Corresponding Standard	EN 10269-2013 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Alloy Steel
Density	7.85 g/cm³

23MnB4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Cu	B	Al
Minimum Value	0.2	-	0.9	-	-	-	-	0.0008	0.02
Maximum Value	0.25	0.3	1.2	0.025	0.025	0.3	0.25	0.005	-

23MnB4 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Impact Energy Absorption KV2 J
-*	+AC	≤520	-	-	≥64	-
d≤24**		800~950	≥640	≥14	≥52	≥40

1 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

2 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
23 MnB4	23 MnB4	1.5535

3 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

China		Japan	United States	International Organization for Standardization	European Standard
YB	GB	JIS	ASTM	ISO	EN
QML25MnB	ML25MnB	SWRCHB526	15B25	23MnB4	23MnB4

4 Approximate Comparison Table Steel for Cold Heading and Cold Extrusion

China	Japan	United States	International Organization for Standardization	European Standard
GB	JIS	ASTM	ISO	EN
ML25MnB GB/T 28906-2025 GB/T 6478-2015	SWRCHB526 JIS G3058-1-2021	15B25 ASTM A29/A29M-23	23MnB4 ISO 4954-2022	23MnB4 EN 10263-4-2017

23MnB4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!