X3CrNiMoBN 17-13-3 1.4910 - EN 10269-2013

Grade	X3CrNiMoBN 17-13-3
European Standard Steel Grade	1.4910
Corresponding Standard	EN 10269-2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X3CrNiMoBN 17-13-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	B
Minimum Value	-	-	-	-	-	16	12	2	0.1	0.0015
Maximum Value	0.04	0.75	2	0.035	0.015	18	14	3	0.18	0.005

X3CrNiMoBN 17-13-3 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
d≤160	+AT	550~750	≥260	≥35	≥100

Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X3CrNiMoBN 17-13-3	4910-316-77-E	X3CrNiMoBN 17-13-3	1.4910

X3CrNiMoBN17-13-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!