中文版
Home Material EN 10269-2013
简体 | 繁體
Grade X6CrNiTiB 18-10
European Standard Steel Grade 1.4941
Corresponding Standard EN 10269-2013
Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 7.9 g/cm3
X6CrNiTiB 18-10 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni B More
Minimum Value 0.04 - - - - 17 9 0.0015 Ti： 5 × C ~ 0.80
Maximum Value 0.08 1 2 0.035 0.015 19 12 0.005
X6CrNiTiB 18-10 Mechanical Properties
diameter
d
mm		 Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Impact Energy Absorption
KV2
J
d≤160 +AT 490~680 ≥195 ≥35 ≥100
Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
07Cr19Ni11Ti
(1Cr18Ni11Ti) 		S32169 321 HTP SUS 321 HTP
SUS 321 H 		STS 321 HTP 321H S32109 X7CrNiTi 18-10
X6CrNiTiB 18-10 		4940-321-09-I X12CrNiTi 18-9 1.4878 Z6CNT 18-12 X8CrNiTi 18-10
X6CrNiTiB 18-10 		1.4878
1.4941
1.4940 		12Х18Н10Т 2337 321S20
X6CrNiTiB18-10 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X6CrNiTiB 18-10 1.4941
2 EN 10269-2006
X6CrNiTiB18-10 1.4941
3 EN 10302-2008
X6CrNiTiB 18-10 1.4941
4 ISO TS 15510-2003
X6CrNiTiB18-10
5 EN 10269-2013
X6CrNiTiB 18-10 1.4941
6 ISO 15510-2014
X6CrNiTiB18-10 4941-321-09-I
7 NF EN 10269-1999
X6CrNiTiB18-10 1.4941
8 DIN EN 10269-2014
X6CrNiTiB 18-10 1.4941
9 ISO 9328-7-2018
X6CrNiTiB18-10
10 NF EN 10088-1-2005
X6CrNiTiB18-10 1.4941
11 NF EN 10028-7-2008
X6CrNiTiB18-10 1.4941
12 NF EN 10028-7-2000
X6CrNiTiB18-10 1.4941

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!