1J22 - GB /T 14986-2008

Grade	1J22
Corresponding Standard	GB /T 14986-2008 High Saturation Magentic Induction, Magnetic Compensate Alloys Depending on Temperature Variation, Corrosion-Resisting, Iron-Aluminium, Permanet Permeablitity, Soft Magneticalloys
Classification	Special Alloy Steel
Density	8.2 g/cm³

1J22 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Ni	Cu	V	Co	More
Minimum Value	-	-	-	-	-	-	-	0.8	49	Fe: Balance
Maximum Value	0.04	0.3	0.3	0.02	0.02	0.5	0.2	1.8	51	Fe: Balance

1J22 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa
	Hard	1325
	Soft	490

Approximate Comparison Table Soft Magnetic Metal

1J22 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!