NiCr15Fe7TiAl 2.4669 - EN 10269-2013

Grade	NiCr15Fe7TiAl
European Standard Steel Grade	2.4669
Corresponding Standard	EN 10269-2013 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Nickel and Nickel Alloys
Properties	High Strength Corrosion Resistance High-Temperature Resistance
Density	8.2 g/cm³

NiCr15Fe7TiAl Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	Co	Al	More
Minimum Value	5	-	-	-	-	-	14	70	-	2.25	-	0.4	Nb+Ta: 0.70~1.20
Maximum Value	9	0.08	0.5	1	0.02	0.015	17	-	0.5	2.75	1	1	Nb+Ta: 0.70~1.20

NiCr15Fe7TiAl Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Impact Energy Absorption KV2 J
d≤25	+AT+P	1000~1200	≥650	≥20	≥28	≥22

NiCr15Fe7TiAl Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!