NiCr19Fe19Nb5Mo 3 2.4668 - EN 10269-2013

Grade	NiCr19Fe19Nb5Mo 3
European Standard Steel Grade	2.4668
Corresponding Standard	EN 10269-2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Nickel and Nickel Alloys
Properties	Strength Corrosion Resistance High-Temperature Strength
Density	8.2 g/cm³

NiCr19Fe19Nb5Mo 3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	Nb	B	Co	Al	More
Minimum Value	0.02	-	-	-	-	17	50	-	2.8	0.6	4.7	0.002	-	0.3	Fe：余量
Maximum Value	0.08	0.035	0.035	0.015	0.015	21	55	0.3	3.3	1.2	5.5	0.006	1	0.7	Fe：余量

NiCr19Fe19Nb5Mo 3 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
d≤160	+P	≥1230	≥1030	≥12	≥12

NiCr19Fe19Nb5Mo3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!