X22CrMoV 12-1 1.4923 - EN 10269-2013

Grade	X22CrMoV 12-1
European Standard Steel Grade	1.4923
Corresponding Standard	EN 10269-2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Alloy Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X22CrMoV 12-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^*	Cr	Ni	Mo	V
Minimum Value	0.18	-	0.4	-	-	11	0.3	0.8	0.25
Maximum Value	0.24	0.5	0.9	0.025	0.015	12.5	0.8	1.2	0.35

X22CrMoV 12-1 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J
-*	+A	-	-	-	-	≤302	-
d≤160**	+QT1	800~950	≥600	≥14	≥40	-	≥27
d≤160***	+QT2	900~1050	≥750	≥11	≥35	-	≥20

1 Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X22CrMoV12-1	4923-422-77-E	1.4923

2 Approximate Comparison Table

X22CrMoV12-1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!