X1CrNb 15 1.4595 - EN 10088-1-2005

Grade	X1CrNb 15
European Standard Steel Grade	1.4595
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X1CrNb 15 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	N	Nb
Minimum Value	-	-	-	-	-	14	-	0.2
Maximum Value	0.02	1	1	0.025	0.015	16	0.02	0.6

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Ferritic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X1CrNb15	4595-429-71-I	1.4595

2 Approximate Comparison Table Ferritic Stainless Steel

China		Japan	International Organization for Standardization		European Standard
GB	ISC	JIS	ISO	Numerical Grade	EN	Numerical Grade
022Cr15NbTi GB/T 20878-2024	S11573 (S11563)	SUS429	X1CrNb15 ISO 15510	4595-429-71-Ⅰ	X1CrNb15 EN 10088-1	1.4595

X1CrNb15 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNb 15 1.4595
2	ISO 15510-2014
	X1CrNb15 4595-429-71-I
3	NF EN 10088-2-2005
	X1CrNb15 1.4595
4	NF EN 10088-1-2005
	X1CrNb15 1.4595

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!