X46Cr 13 1.4034 - EN 10088-1-2005

Grade	X46Cr 13
European Standard Steel Grade	1.4034
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X46Cr 13 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S ^ⓑ	Cr
Minimum Value	0.43	-	-	-	-	12.5
Maximum Value	0.5	1	1	0.04	0.015	14.5

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table

China		United States	International Organization for Standardization		Germany	France	European Standard		Russia
GB	ISC	UNS	ISO	Numerical Grade	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST
40Cr13 (4Cr13)	S42040	S42000	X39Cr 13 X46Cr13 X52Cr13	4031-420-00-I 4034-420-00-I 4038-420-00-I	X38Cr 13	Z40C 14	X39Cr 13	1.4031 1.4034 (1.4038)	40Х13

2 Approximate Comparison Table

Germany		France	European Standard		United Kingdom
DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	BS EN/BS
X46Cr 13 (X40Cr 13)	1.4034	Z38C 13M	X46Cr13	1.4034	420S45

X46Cr13 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X46Cr 13 1.4034
2	ISO TS 15510-2003
	X46Cr13
3	DIN 17440-1972
	X46Cr 13 X40Cr 13 1.4034
4	EN 10088-3-2005
	X46Cr13 1.4034
5	EN 10088-3-2014
	X46Cr 13 1.4034
6	ISO 15510-2014
	X46Cr13 4034-420-00-I
7	NF A 35-565-1994
	X46Cr13
8	DIN EN 10088-3-2014
	X46Cr 13 1.4034
9	NF EN 10088-2-2005
	X46Cr13 1.4034
10	NF EN 10088-1-2005
	X46Cr13 1.4034

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!