X2CrNiMoV 13-5-2 1.4415 - EN 10088-1-2005

Grade	X2CrNiMoV 13-5-2
European Standard Steel Grade	1.4415
Corresponding Standard	EN 10088-1-2005 Stainless steels. Part 1:List of stainless steels
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X2CrNiMoV 13-5-2 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S	Cr	Ni	Mo	Ti	V
Minimum Value	-	-	-	-	-	11.5	4.5	1.5	-	0.1
Maximum Value	0.03	0.5	0.5	0.04	0.015	13.5	6.5	2.5	0.01	0.5

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Martensitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X2CrNiMoV13-5-2	4415-415-92-E	1.4415

X2CrNiMoV13-5-2 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrNiMoV 13-5-2 1.4415
2	EN 10088-3-2014
	X2CrNiMoV 13-5-2 1.4415
3	ISO 15510-2014
	X2CrNiMoV13-5-2 4415-415-92-E
4	DIN EN 10088-3-2014
	X2CrNiMoV 13-5-2 1.4415
5	NF EN 10088-1-2005
	X2CrNiMoV13-5-2 1.4415

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!