X4CrNiMo 16-5-1 1.4418 - EN 10088-1-2005

Grade	X4CrNiMo 16-5-1
European Standard Steel Grade	1.4418
Corresponding Standard	EN 10088-1-2005 Stainless steels. Part 1:List of stainless steels
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X4CrNiMo 16-5-1 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S ^ⓑ	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	15	4	0.8	0.02
Maximum Value	0.06	0.7	1.5	0.04	0.015	17	6	1.5	-

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Martensitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X4CrNiMo16-5-1	4418-431-77-E	X4CrNiMo16-5-1	1.4418

X4CrNiMo16-5-1 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X4CrNiMo 16-5-1 1.4418
2	EN 10250-4-1999
	X4CrNiMo16-5-1 1.4418
3	EN 10088-3-2005
	X4CrNiMo16-5-1 1.4418
4	EN 10088-3-2014
	X4CrNiMo16-5-1 1.4418
5	ISO 15510-2014
	X4CrNiMo16-5-1 4418-431-77-E
6	ISO 9328-7-2018
	X4CrNiMo16-5-1
7	DIN EN 10088-3-2014
	X4CrNiMo16-5-1 1.4418
8	NF EN 10088-2-2005
	X4CrNiMo16-5-1 1.4418
9	NF EN 10088-1-2005
	X4CrNiMo16-5-1 1.4418
10	NF EN 10028-7-2008
	X4CrNiMo16-5-1 1.4418
11	NF EN 10028-7-2000
	X4CrNiMo16-5-1 1.4418
12	EN 10272-2016
	X4CrNiMo16-5-1 1.4418

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!