X5CrNiMoCuNb 14-5 1.4594 - EN 10088-1-2005

Grade	X5CrNiMoCuNb 14-5
European Standard Steel Grade	1.4594
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Precipitation-Hardening Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X5CrNiMoCuNb 14-5 Chemical Element Composition Content (%)

Component	C ^ⓒ	Si	Mn	P	S	Cr	Ni	Cu	Mo	Nb
Minimum Value	-	-	-	-	-	13	5	1.2	1.2	0.15
Maximum Value	0.07	0.7	1	0.04	0.015	15	6	2	2	0.6

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X5CrNiMoCuNb14-5	4594-155-92-E	1.4594

X5CrNiMoCuNb14-5 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X5CrNiMoCuNb 14-5 1.4594
2	EN 10088-3-2014
	X5CrNiMoCuNb 14-5 1.4594
3	ISO 15510-2014
	X5CrNiMoCuNb14-5 4594-155-92-E
4	DIN EN 10088-3-2014
	X5CrNiMoCuNb 14-5 1.4594
5	NF EN 10088-1-2005
	X5CrNiMoCuNb14-5 1.4594

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!