X8NiCrAlTi 32-21 1.4959 - EN 10088-1-2005

Grade	X8NiCrAlTi 32-21
European Standard Steel Grade	1.4959
Corresponding Standard	EN 10088-1-2005 Stainless Steels. Part 1:List of Stainless Steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X8NiCrAlTi 32-21 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	N	Ti	Co	Al
Minimum Value	0.05	-	-	-	-	19	30	-	-	0.25	-	0.25
Maximum Value	0.1	0.7	1.5	0.015	0.01	22	34	0.5	0.03	0.65	0.5	0.65

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

Japan	United States	International Organization for Standardization		European Standard
JIS	UNS	ISO	Numerical Grade	EN	Numerical Grade
NCF800	N08800	X8NiCrAlTi32-21	4876-088-00-I	X8NiCrAlTi32-21	1.4959 1.4876

X8NiCrAlTi32-21 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X8NiCrAlTi 32-21 1.4959
2	ISO 4955-2005
	X8NiCrAlTi32-21
3	EN 10302-2008
	X8NiCrAlTi 32-21 1.4959
4	DIN EN 10216-5-2014
	X8NiCrAlTi 32-21 1.4959
5	ISO 4955-1994
	X8NiCrAlTi32-21 (H18)
6	ISO 15510-2014
	X8NiCrAlTi32-21 4876-088-00-I
7	ISO 9328-7-2018
	X8NiCrAlTi32-21
8	ISO 4955-2016
	X8NiCrAlTi32-21 4876-088-00-I
9	EN 10028-7-2016
	X8NiCrAlTi32-21 1.4959

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!