X1CrNi 25-21 1.4335 - EN 10088-1-2005

Grade	X1CrNi 25-21
European Standard Steel Grade	1.4335
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X1CrNi 25-21 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	24	20	-	-
Maximum Value	0.02	0.25	2	0.025	0.01	26	22	0.2	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization	European Standard
UNS	ISO	EN	Numerical Grade
S31002	X1CrNi25-21	X1CrNi25-21	1.4335

X1CrNi25-21 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNi 25-21 1.4335
2	EN 10253-4-2003
	X1CrNi25-21 1.4335
3	ISO TS 15510-2003
	X1CrNi25-21
4	ISO 15510-2014
	X1CrNi25-21 4335-310-02-I
5	ISO 9328-7-2018
	X1CrNi25-21
6	NF EN 10088-2-2005
	X1CrNi25-21 1.4335
7	NF EN 10088-1-2005
	X1CrNi25-21 1.4335
8	NF EN 10028-7-2008
	X1CrNi25-21 1.4335
9	NF EN 10028-7-2000
	X1CrNi25-21 1.4335

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!