X2CrMnNiN 17-7-5 1.4371 - EN 10088-1-2005

Grade	X2CrMnNiN 17-7-5
European Standard Steel Grade	1.4371
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X2CrMnNiN 17-7-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	6	-	-	16	3.5	0.15
Maximum Value	0.03	1	8	0.045	0.015	17	5.5	0.2

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

United States		International Organization for Standardization	European Standard
ASTM	UNS	ISO	EN	Numerical Grade
201LN	S20153	X2CrMnNiN17-7-5	X2CrMnNiN17-7-5	1.4371

X2CrMnNiN17-7-5 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrMnNiN 17-7-5 1.4371
2	ISO 15510-2014
	X2CrMnNiN17-7-5 4371-201-53-I
3	ISO 9328-7-2018
	X2CrMnNiN17-7-5
4	NF EN 10088-2-2005
	X2CrMnNiN17-7-5 1.4371
5	NF EN 10088-1-2005
	X2CrMnNiN17-7-5 1.4371

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!