X8CrMnCuNB 17-8-3 1.4597 - EN 10088-1-2005

Grade	X8CrMnCuNB 17-8-3
European Standard Steel Grade	1.4597
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.8 g/cm³

X8CrMnCuNB 17-8-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	B
Minimum Value	-	-	6.5	-	-	16	-	2	-	0.15	0.0005
Maximum Value	0.1	2	8.5	0.04	0.03	18	2	3.5	1	0.3	0.005

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X8CrMnCuN17-8-3	4597-204-76-I	1.4597

X8CrMnCuNB17-8-3 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X8CrMnCuNB 17-8-3 1.4597
2	NF EN 10088-2-2005
	X8CrMnCuNB17-8-3 1.4597
3	NF EN 10088-1-2005
	X8CrMnCuNB17-8-3 1.4597

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!