X3CrNiCu 19-9-2 1.4560 - EN 10088-1-2005

Grade	X3CrNiCu 19-9-2
European Standard Steel Grade	1.4560
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X3CrNiCu 19-9-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	N
Minimum Value	-	-	1.5	-	-	18	8	1.5	-
Maximum Value	0.035	1	2	0.045	0.015	19	9	2	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Stainless steels for cold heading and cold extruding

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X3CrNiCu19-9-2	4560-304-75-E	X3CrNiCu19-9-2	1.4560

X3CrNiCu19-9-2 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X3CrNiCu 19-9-2 1.4560
2	EN 10263-5-2001
	X3CrNiCu19-9-2 1.4560
3	EN 10088-3-2014
	X3CrNiCu 19-9-2 1.4560
4	ISO 15510-2014
	X3CrNiCu19-9-2 4560-304-75-E
5	DIN EN 10263-5-2018
	X3CrNiCu19-9-2 1.4560
6	DIN EN 10088-3-2014
	X3CrNiCu 19-9-2 1.4560
7	ISO 4954-2018
	X3CrNiCu19-9-2 4560-304-75-E
8	NF EN 10088-1-2005
	X3CrNiCu19-9-2 1.4560
9	EN 10263-5-2017
	X3CrNiCu19-9-2 1.4560
10	ISO 4954-2-2024
	X3CrNiCu19-9-2 4560-304-75-E

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!