X2CrNiCu 19-10 1.4650 - EN 10088-1-2005

Grade	X2CrNiCu 19-10
European Standard Steel Grade	1.4650
Corresponding Standard	EN 10088-1-2005 Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X2CrNiCu 19-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	N
Minimum Value	-	-	-	-	-	18.5	9	-	-
Maximum Value	0.03	1	2	0.045	0.015	20	10	1	0.08

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

China	Japan	International Organization for Standardization		European Standard
ISC	JIS	ISO	Numerical Grade	EN	Numerical Grade
S30403	SUS304L	X2CrNiCu19-10	4650-304-75-E	X2CrNiCu19-10	1.4650①

X2CrNiCu19-10 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrNiCu 19-10 1.4650
2	ISO 15510-2014
	X2CrNiCu19-10 4650-304-75-E
3	NF EN 10088-1-2005
	X2CrNiCu19-10 1.4650

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!