X1NiCrMoCu 31-27-4 1.4563 - EN 10088-1-2005

Grade	X1NiCrMoCu 31-27-4
European Standard Steel Grade	1.4563
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X1NiCrMoCu 31-27-4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^ⓒ	Mo	N
Minimum Value	-	-	-	-	-	26	30	0.7	3	-
Maximum Value	0.02	0.7	2	0.03	0.01	28	32	1.5	4	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table corrosion-resistant alloy

China		United States	Germany
GB	ISC	UNS	DIN EN/DIN	W-Nr.
NS 1404 BG2830	H 08028	N 08028 Sanicro 28	X1NiCrMoCu 31-27-4	1.4563

2 Approximate Comparison Table

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
N08028	X1NiCrMoCu31-27-4	4563-080-28-I	X1NiCrMoCu31-27-4	1.4563

X1NiCrMoCu31-27-4 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1NiCrMoCu 31-27-4 1.4563
2	EN 10253-4-2003
	X1NiCrMoCu31-27-4 1.4563
3	EN 10250-4-1999
	X1NiCrMoCu 31-27-4 1.4563
4	ISO TS 15510-2003
	X1NiCrMoCu31-27-4
5	EN 10088-3-2014
	X1NiCrMoCu31-27-4 1.4563
6	ISO 15510-2014
	X1NiCrMoCu31-27-4 4563-080-28-I
7	ISO 9328-7-2018
	X1NiCrMoCu31-27-4
8	DIN EN 10088-3-2014
	X1NiCrMoCu31-27-4 1.4563
9	NF EN 10088-2-2005
	X1NiCrMoCu31-27-4 1.4563
10	NF EN 10088-1-2005
	X1NiCrMoCu31-27-4 1.4563
11	NF EN 10028-7-2008
	X1NiCrMoCu31-27-4 1.4563
12	NF EN 10028-7-2000
	X1NiCrMoCu31-27-4 1.4563

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!