X1CrNiMoCuN 25-25-5 1.4537 - EN 10088-1-2005

Grade	X1CrNiMoCuN 25-25-5
European Standard Steel Grade	1.4537
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8.1 g/cm³

X1CrNiMoCuN 25-25-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^ⓒ	Mo	N
Minimum Value	-	-	-	-	-	24	24	1	4.7	0.17
Maximum Value	0.02	0.7	2	0.03	0.01	26	27	2	5.7	0.25

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
N08932	X1CrNiMoCuN25-25-5	4537-310-92-E	X1CrNiMoCuN25-25-5	1.4537

X1CrNiMoCuN25-25-5 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNiMoCuN 25-25-5 1.4537
2	EN 10088-3-2014
	X1CrNiMoCuN 25-25-5 1.4537
3	ISO 15510-2014
	X1CrNiMoCuN25-25-5 4537-310-92-E
4	ISO 9328-7-2018
	X1CrNiMoCuN25-25-5
5	DIN EN 10088-3-2014
	X1CrNiMoCuN 25-25-5 1.4537
6	NF EN 10088-2-2005
	X1CrNiMoCuN25-25-5 1.4537
7	NF EN 10088-1-2005
	X1CrNiMoCuN25-25-5 1.4537
8	NF EN 10028-7-2008
	X1CrNiMoCuN25-25-5 1.4537
9	NF EN 10028-7-2000
	X1CrNiMoCuN25-25-5 1.4537

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!