X1CrNiMoCuNW 24-22-6 1.4659 - EN 10088-1-2005

Grade	X1CrNiMoCuNW 24-22-6
European Standard Steel Grade	1.4659
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8.2 g/cm³

X1CrNiMoCuNW 24-22-6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^ⓒ	Mo	N	W
Minimum Value	-	-	2	-	-	23	21	1	5.5	0.35	1.5
Maximum Value	0.02	0.7	4	0.03	0.01	25	23	2	6.5	0.5	2.5

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	Numerical Grade
S31266	X1CrNiMoCuNW24-22-6	4659-312-66-I	1.4659

X1CrNiMoCuNW24-22-6 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1CrNiMoCuNW 24-22-6 1.4659
2	ISO TS 15510-2003
	X1CrNiMoCuNW24-22-6
3	EN 10088-2-2005
	X1CrNiMoCuNW 24-22-6 1.4659
4	EN 10088-3-2014
	X1CrNiMoCuNW 24-22-6 1.4659
5	ISO 15510-2014
	X1CrNiMoCuNW24-22-6 4659-312-66-I
6	DIN EN 10088-3-2014
	X1CrNiMoCuNW 24-22-6 1.4659
7	NF EN 10088-2-2005
	X1CrNiMoCuNW24-22-6 1.4659
8	NF EN 10088-1-2005
	X1CrNiMoCuNW24-22-6 1.4659

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!