X10CrAlSi25 1.4762 - EN 10088-1-2005

Grade	X10CrAlSi25
European Standard Steel Grade	1.4762
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance
Density	7.7 g/cm³

X10CrAlSi25 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Al
Minimum Value	-	0.7	-	-	-	23	1.2
Maximum Value	0.12	1.4	1	0.04	0.015	26	1.7

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Heat-Resistant Stainless Steel

Germany		France	European Standard
DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade
X10CrAl 24 X10CrAlSi 25	1.4762 1.4762	Z10CAS 24	X10CrAlSi 25	1.4762

2 Approximate Comparison Table Ferritic Stainless Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X10CrAlSi25	4762-445-72-I	1.4762

X10CrAlSi25 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X10CrAlSi25 1.4762
2	ISO 4955-2005
	X10CrAlSi25
3	DIN EN 10095-2018
	X10CrAlSi25 1.4762
4	ISO 4955-1994
	X10CrAlSi25 (H6)
5	ISO 15510-2014
	X10CrAlSi25 4762-445-72-I
6	ISO 4955-2016
	X10CrAlSi25 4762-445-72-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!