中文版
Home Material EN 10088-1-2005
简体 | 繁體
Grade X8CrNiTi 18-10
European Standard Steel Grade 1.4878
Corresponding Standard EN 10088-1-2005
Staehle Stainless steels. Part 1:List of stainless steels
Classification Austenitic Stainless Steel
Properties Corrosion Resistance
Density 7.9 g/cm3
X8CrNiTi 18-10 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni More
Minimum Value - - - - - 17 9 Ti：5×C ~ 0.80
Maximum Value 0.1 1 2 0.045 0.015 19 12
① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.
1 Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
07Cr19Ni11Ti
(1Cr18Ni11Ti) 		S32169 321 HTP SUS 321 HTP
SUS 321 H 		STS 321 HTP 321H S32109 X7CrNiTi 18-10
X6CrNiTiB 18-10 		4940-321-09-I X12CrNiTi 18-9 1.4878 Z6CNT 18-12 X8CrNiTi 18-10
X6CrNiTiB 18-10 		1.4878
1.4941
1.4940 		12Х18Н10Т 2337 321S20
2 Approximate Comparison Table Austenitic Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
07Cr19Ni11Ti
(1Cr18Ni11Ti) 		S32169 321 SUS 321 STS 321 321H S32109 X7CrNiTi 18-10 X12CrNiTi 18-9 1.4878 Z6CNT 18-12 X10CrNiTi 18-10 1.4878 12Х18Н10Т 2337 321S20
3 Approximate Comparison Table Austenitic Heat-Resistant Steel
Japan United States International Organization for Standardization France European Standard Russia Sweden United Kingdom
JIS ASTM UNS ISO NF EN/NF EN Numerical Grade GOST SS BS EN/BS
SUS321H 321H S32109 X7CrNiTi18-10 Z6CNT18-10 X8CrNiTi18-10 1.4878 12KH18N10T 2337 321S12
321S51
X8CrNiTi18-10 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X8CrNiTi 18-10 1.4878
2 DIN EN 10095-2018
X8CrNiTi 18-10 1.4878
3 NF EN 10088-1-2005
X8CrNiTi18-10 1.4878

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!