X10NiCrAlTi 32-21 1.4876 - EN 10088-1-2005

Grade	X10NiCrAlTi 32-21
European Standard Steel Grade	1.4876
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X10NiCrAlTi 32-21 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Ti	Al
Minimum Value	-	-	-	-	-	19	30	0.15	0.15
Maximum Value	0.12	1	2	0.03	0.015	23	34	0.6	0.6

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Austenitic Stainless Steel

Japan	United States	International Organization for Standardization		European Standard
JIS	UNS	ISO	Numerical Grade	EN	Numerical Grade
NCF800	N08800	X8NiCrAlTi32-21	4876-088-00-1	X8NiCrAlTi32-21	1.4959 1.4876

2 Approximate Comparison Table Austenitic Heat-Resistant Steel

United States		International Organization for Standardization	European Standard
ASTM	UNS	ISO	EN	Numerical Grade
800	N08800	X8NiCrAlTi32-21	X10NiCrAlTi32-21	1.4876

X10NiCrAlTi32-21 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X10NiCrAlTi 32-21 1.4876
2	DIN EN 10095-2018
	X10NiCrAlTi 32-21 1.4876

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!