X6NiCrSiNCe 35-25 1.4854 - EN 10088-1-2005

Grade	X6NiCrSiNCe 35-25
European Standard Steel Grade	1.4854
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

X6NiCrSiNCe 35-25 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N	Ce
Minimum Value	0.04	1.2	-	-	-	24	34	0.12	0.03
Maximum Value	0.08	2	2	0.04	0.015	26	36	0.2	0.08

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
S35315	X6NiCrSiNCe35-25	4854-353-15-E	X6NiCrSiNCe35-25	1.4854

X6NiCrSiNCe35-25 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X6NiCrSiNCe 35-25 1.4854
2	ISO 4955-2005
	X6NiCrSiNCe35-25
3	EN 10296-2-2005
	X6NiCrSiNCe35-25 1.4854
4	DIN EN 10095-2018
	X6NiCrSiNCe 35-25 1.4854
5	ISO 15510-2014
	X6NiCrSiNCe35-25 4854-353-15-E
6	ISO 4955-2016
	X6NiCrSiNCe35-25 4854-353-15-E
7	NF EN 10088-1-2005
	X6NiCrSiNCe35-25 1.4854
8	NF EN 10296-2-2005
	X6NiCrSiNCe35-25 1.4854
9	DIN EN 10296-2-2006
	X6NiCrSiNCe35-25 1.4854

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!