N07080 Nimonic 80A - SAE J467b-1956(R1968)

Commercial Grade
USA UNS	N07080
Other Names
Corresponding Standard	SAE J467b-1956(R1968) Special Purpose Alloys (Superalloys)
Brand/Supplier	America ->
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.19 g/cm³

Chemical Element Composition Content (%)

	Component	Fe	C	Si	Mn	Cr	Ti	Co	Al	More
standard	Minimum Value	-	-	-	-	-	-	-	-	Ni: Remainder
	Maximum Value	-	-	-	-	-	-	-	-
	Nominal Value	2.4	0.06	0.7	0.1	19.5	2.5	1.1	1.3

	Component	Fe	C	Si	Mn	S	Cr	Cu	Ti	Zr	B	Co	Pb	Al	More
SMC	Minimum Value	-	-	-	-	-	18	-	1.8	-	-	-	-	1	Ni: Remainder
	Maximum Value	3	0.1	1	1	0.015	21	0.2	2.7	0.15	0.008	2	0.0025	1.8
	Nominal Value	-	-	-	-	-	-	-	-	-	-	-	-	-

Standard - The data in this standardized credit score table are typical values, not design parameters. It is recommended to obtain design data through actual testing or negotiation with the material manufacturer
Chemical composition of SMC-Special metals corporation

Mechanical Properties

Temperature	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Room temperature 21°C	Solution heat treatment, aging 699°C	1000	621	39	38
High Temperature 760°C	Solution heat treatment, aging 699°C	600	503	17	19

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!