中文版
Home Material DIN EN 10095-2018
简体 | 繁體
Grade NiCr15Fe
Germany W-Nr. 2.4816
Corresponding Standard DIN EN 10095-2018
Heat resisting steels and nickel alloys
Classification Special Alloy Steel
Properties Corrosion Resistance Forgability
NiCr15Fe Chemical Element Composition Content (%)
Component Fe C Si Mn P S Cr Ni Cu Ti Al
Minimum Value 6 0.05 - - - - 14 72 - - -
Maximum Value 10 0.1 0.5 1 0.02 0.015 17 - 0.5 0.3 0.3
NiCr15Fe Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Flat steel; t≤75 Annealing (+A) 550~850 ≥240 ≥30 ≤200
Bars; t≤160 Annealing (+A) 550~850 ≥240 ≥30 ≤200
Coil bar; t≤25 Annealing (+A) 550~850 ≥240 ≥30 ≤200
1 Approximate Comparison Table Deformed High-Temperature Alloy
China Japan United States Germany France
GB ISC JIS Commercial Grade AMS DIN EN/DIN W-Nr. NF EN/NF
GH3600
(GH600) 		H36000 NCF 600B Inconel 600 5665 NiCr15Fe
(NiCr15Fe8) 		2.4816 NC15Fe
NiCral Z
2 Approximate Comparison Table Corrosion-Resistant Alloy
China Japan South Korea United States Germany United Kingdom
GB ISC JIS KS Commercial Grade UNS W-Nr. L-Nr. BS EN/BS
NS 3102
(NS 312)
(1Crl 5 Ni75Fe8) 		H 06600
H 03102 		NCF 600 NCF 600 Inconel 600 N 06600 NiCr15Fe 2.4816 NA 14
NiCr15Fe Corresponding Standards(Same grade name, different standards)
1 DIN EN 10095-2018
NiCr15Fe 2.4816
2 DIN 17750-2002
NiCr15Fe 2.4816
3 DIN 17742-2002
NiCr15Fe 2.4816
4 DIN 17752-2002
NiCr15Fe 2.4816
5 DIN 17742-2020
NiCr15Fe 2.4816

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!