NiMo29Cr 2.4600 - DIN 17750-2002

Grade	NiMo29Cr
Germany W-Nr.	2.4600
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Special Alloy Steel
Properties	Corrosion Resistance
Density	9.2 g/cm³

NiMo29Cr Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	W	V	Co	Al	More
Minimum Value	1	-	-	-	-	-	0.5	65	-	26	-	-	-	-	0.1	Ni+Ta≤0.4
Maximum Value	6	0.01	0.1	3	0.025	0.015	3	-	0.5	32	0.2	3	0.2	3	0.5	Ni+Ta≤0.4

NiMo29Cr Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip steel; 0.2<t≤2.5	Solid Solution Treatment (F75)	≥750	≥340	≥40	≤240
Thin plate and thick plate; 1<t≤50	Solid Solution Treatment (F75)	≥750	≥340	≥40	≤240

1 Approximate Comparison Table Corrosion-Resistant Alloy

2 Approximate Comparison Table Corrosion-Resistant Alloy

NiMo29Cr Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!