NiMo16Cr15W 2.4819 - DIN 17750-2002

Grade	NiMo16Cr15W
Germany W-Nr.	2.4819
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Special Alloy Steel
Properties	Corrosion Resistance
Density	8.9 g/cm³

NiMo16Cr15W Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	W	V	Co	More
Minimum Value	4	-	-	-	-	-	14.5	-	15	3	-	-	Ni:余量
Maximum Value	7	0.01	0.08	1	0.02	0.015	16.5	0.5	17	4.5	0.35	2.5	Ni:余量

NiMo16Cr15W Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip steel; 0.2<t≤2.5	Solution Treatment (F69)	≥690	≥310	≥30	≤240
Thin plates and thick plates; 1 < t ≤ 5	Solution Treatment (F69)	≥690	≥310	≥30	≤240
Thin Sheet and Thick Plate; 5<t≤20	Solution Treatment (F69)	≥690	≥280	≥25	≤240

Approximate Comparison Table Corrosion-Resistant Alloy

NiMo16Cr15W Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!