NiCu30Fe 2.4360 - DIN 17750-2002

Grade	NiCu30Fe
Germany W-Nr.	2.4360
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.8 g/cm³

NiCu30Fe Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Al	More
Minimum Value	1	-	-	-	-	28	-	-	Ni+Co≥63
Maximum Value	2.5	0.15	0.5	2	0.02	34	0.3	0.5	Ni+Co≥63

NiCu30Fe Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip steel; 0.2<t≤2.5	Soft annealing (F45)	≥450	≥175	≥30
Thin plate and thick plate; 0.3<t≤50	Soft annealing (F45)	≥450	≥175	≥30
Strip steel; 0.2<t≤2.5	1/2-Hard (F55)	≥550	≥280	≥25	170
Thin plate and thick plate; 1<t≤50	1/2-Hard (F55)	≥550	≥280	≥25	170
Strip steel; 0.2<t≤2.5	Hard (F70)	≥700	≥650	≥2	210
Thin plate and thick plate; 1<t≤50	Hard (F70)	≥700	≥650	≥2	210

Approximate Comparison Table Corrosion-Resistant Alloy

NiCu30Fe Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!