Grade 16Mn
China ISC L20166
Corresponding Standard GB 6479-2000
Seamless Steel Tubes for High-Pressure Chemical Fertilizer Equipments
Classification Alloy Steel
16Mn Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu
Minimum Value 0.12 0.2 1.2 - - - - -
Maximum Value 0.2 0.6 1.6 0.03 0.03 0.3 0.3 0.2
16Mn Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Impact Energy Absorption
KV2
J
normalizing 490~670 ≥320 ≥21 KU2
≥47
• When the final rolling temperature of hot-rolled pipes meets the normalizing temperature, normalizing can be used as a substitute.
• Steel pipes with an outer diameter d≥57mm and a wall thickness T≥14mm shall undergo U-notch impact tests as standard specimens. The evaluation of impact test results shall be in accordance with the provisions of GB/T 17505.
• Except for 12Cr2Mo, for other grades, when the wall thickness T is greater than 16 to 40mm, the yield point is allowed to decrease by 10MPa.
1 Approximate Comparison Table High-Quality Carbon Structural Steel
China Japan United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB JIS ASTM ISO DIN EN/DIN NF EN/NF EN Numerical Grade SS BS EN/BS
16Mn SS490B A441
A633
E355C
Fe510C
St52-3U E36-3 S355J0
Fe510C
1.0553 2132-01
2134-01
50C
2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS AISI ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
16Mn SM490
SM490C
SS490C
1024
Gr.50type1-4
Fe510D St52-3
St52-3N
1.0570 E36-3 S355J2(+N)
Fe510D1①
S355J2G3①
1.0570(dubl) 17G1S
17GS
S345
2135-01 50D
50C
3 Approximate Comparison Table Structural Alloy Steel
China United States
GB ASTM/AISI
16Mn A350 LF2
16Mn Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!