SM45 - YB /T 107-2013

Grade	SM45
Corresponding Standard	YB /T 107-2013 Hot-rolled steel plates for plastic mould
Classification	Carbon Steel

SM45 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	More
Minimum Value	0.42	0.17	0.5	-	-	-	-	-	Ni+Cr≤0.35%
Maximum Value	0.48	0.37	0.8	0.025	0.025	0.2	0.2	0.3	Ni+Cr≤0.35%

Approximate Comparison Table Plastic Mold Steel

China			Japan	United States	International Organization for Standardization	Germany		Sweden
YB	GB	ISC	JIS	ASTM/AISI	ISO	DIN EN/DIN	W-Nr.	SS
SM45	SM45	T10450	S45C	1045	C45E4	C45E	1.1191	1660

SM45 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!