X2CrNiMnMoN 25-18-6-5 1.4565 - EN 10088-3-2005

Grade	X2CrNiMnMoN 25-18-6-5
European Standard Steel Grade	1.4565
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X2CrNiMnMoN 25-18-6-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	Nb
Minimum Value	-	-	5	-	-	24	16	4	0.3	-
Maximum Value	0.03	1	7	0.03	0.015	26	19	5	0.6	0.15

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table Austenitic Stainless Steel

China	United States	International Organization for Standardization		European Standard
ISC	UNS	ISO	Numerical Grade	Numerical Grade
S34553	S34565	X2CrNiMnMoN25-18-6-5	4565-345-65-I	1.4565

2 Approximate Comparison Table Austenitic Stainless Steel

United States	European Standard
UNS	EN	Numerical Grade
S34565	X2CrNiMnMoN25-18-6-5	1.4565

X2CrNiMnMoN25-18-6-5 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrNiMnMoN 25-18-6-5 1.4565
2	ISO TS 15510-2003
	X2CrNiMnMoN25-18-6-5
3	EN 10088-2-2005
	X2CrNiMnMoN 25-18-6-5 1.4565
4	EN 10088-3-2005
	X2CrNiMnMoN 25-18-6-5 1.4565
5	EN 10088-3-2014
	X2CrNiMnMoN 25-18-6-5 1.4565
6	ISO 15510-2014
	X2CrNiMnMoN25-18-6-5 4565-345-65-I
7	DIN EN 10088-3-2014
	X2CrNiMnMoN 25-18-6-5 1.4565
8	NF EN 10088-2-2005
	X2CrNiMnMoN25-18-6-5 1.4565
9	NF EN 10088-1-2005
	X2CrNiMnMoN25-18-6-5 1.4565

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!