X2CrMnNiN 21-5-1 1.4162 - EN 10088-3-2014

Grade	X2CrMnNiN 21-5-1
European Standard Steel Grade	1.4162
Corresponding Standard	EN 10088-3-2014 Stainless steels-Part 3: Technical delivery condition for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Classification	Duplex Stainless Steel
Properties	Corrosion Resistance

X2CrMnNiN 21-5-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	4	-	-	21	1.35	0.1	0.1	0.2
Maximum Value	0.04	1	6	0.04	0.015	22	1.9	0.8	0.8	0.25

X2CrMnNiN 21-5-1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bar, rod, wire, section, bright products; d≤160	+AT	650~900	≥400	(long.) ≥25	≤290	(long.) ≥60
Cold drawn, precision bar; d≤10	+AT	700~1050	≥500	≥15
Cold drawn, precision bar; 10<d≤16	+AT	700~1050	≥500	≥20
Cold drawn, precision bar; 16<d≤40	+AT	700~1050	≥500	≥20
Cold Drawn, Finished Bar; 40<d≤160	+AT	650~850	≥450	≥30		≥60

Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	EN	Numerical Grade
S32101	X2CrMnNiN21-5-1	4162-321-01-E	X2CrMnNiN21-5-1	1.4162

X2CrMnNiN21-5-1 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!