Inconel alloy 690 N06690 Inconel 690

Grade	Inconel alloy 690
USA UNS	N06690
Other Names
Brand/Supplier	America ->
Classification	Nickel and Nickel Alloys
Properties	Strength Corrosion Resistance
Density	8.19 g/cm³

Inconel alloy 690 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cr	Ni	Cu
Minimum Value	7	-	-	-	-	27	58	-
Maximum Value	11	0.05	0.5	0.5	0.015	31	-	0.5

Inconel alloy 690 Mechanical Properties

diameter/thickness d/t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t=3.81 (Strip, Cold Rolled)	1040°C Annealing	724	348	41	-
13×51 (Flat Steel, Hot Rolled)*	1040°C Annealing	703	352	46	-
d=16 (Rod, Hot Rolled)	1040°C Annealing	738	372	44	-
d=51 (Rod, Hot Rolled)	1040°C Annealing	690	334	50	-
d=12.7 (Tube, Cold Drawn)**	1040°C Annealing	758	461	39	-
d=19 (Tube, Cold Drawn)***	1040°C Annealing	700	379	46	-
d=88.9 (Tube, Cold Drawn)****	1040°C Annealing	648	282	52	-
Thin Plate, Cold Rolled	Annealed at 1000°C	721.414	317.429	39.6326	-
Thin Plate, Cold Rolled	1100°C Annealing	704.639	278.395	44.5334	-
Thin Plate, Cold Rolled	600°C Annealing	1043.29	907.414	7.4474	-
Thin Plate, Cold Rolled	700°C Annealing	864.999	569.297	23.4632	-
Thin Plate, Cold Rolled	Annealed at 750°C	756.006	-	-	-
Thin Plate, Cold Rolled	800°C Annealing	735.371	404.04	40.7732	-
Thin Plate, Cold Rolled	900°C Annealing	726.919	356.836	39.3013	-
	Annealing	714	283	48	190

Approximate Comparison Table corrosion-resistant alloy

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!