SA-193 Grade B6 - ASME SA-193/SA-193M-2019

Grade	SA-193 Grade B6
Corresponding Standard	ASME SA-193/SA-193M-2019 Standard Specification for Alloys-Steel and Stainless Steel Bolting for High-Temperature or or High Pressure Service and Other Special Purpose Applications
Classification	Ferritic Stainless Steel
Properties	Corrosion Resistance

SA-193 Grade B6 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.08	-	-	-	-	11.5
Maximum Value	0.15	1	1	0.04	0.03	13.5

SA-193 Grade B6 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
d≤M100	Tempering Temperature ≥593°C	≥760	≥585	≥15	≥50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!