SA-193 B8MNA Class 1A - ASME SA-193/SA-193M-2019

Grade	SA-193 B8MNA Class 1A
Corresponding Standard	ASME SA-193/SA-193M-2019 Standard Specification for Alloys-Steel and Stainless Steel Bolting for High-Temperature or or High Pressure Service and Other Special Purpose Applications
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

SA-193 B8MNA Class 1A Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	16	10	2	0.1
Maximum Value	0.08	1	2	0.045	0.03	18	13	3	0.16

SA-193 B8MNA Class 1A Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW
d=All Sizes	Solution Heat Treatment in Finished Condition	≥515	≥205	≥30	≥50	≤192

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!