X38CrMoV 5-3 1.2367 - DIN EN ISO 4957-2018

Grade	X38CrMoV 5-3
Germany W-Nr.	1.2367
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.85 g/cm³

X38CrMoV 5-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	V
Minimum Value	0.35	0.3	0.3	-	-	4.8	2.7	0.4
Maximum Value	0.4	0.5	0.5	0.03	0.02	5.2	3.2	0.6

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

X38CrMoV 5-3 Mechanical Properties

	Hardness HBW
Quenching and Tempering	HRC ≥50
Annealed (+A)	HB ≤229

Approximate Comparison Table Hot-Work Tool Steels

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
X38CrMoV5-3	X38CrMoV5-3	1.2367	X38CrMoV5-3	1.2367

X38CrMoV5-3 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	X38CrMoV 5-3 1.2367
2	ISO 4957-2018
	X38CrMoV 5-3 1.2367
3	NF A 35-590-1992
	X38CrMoV5-3 (Z38CDV5-3)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!