X40Cr 14 1.2083 - DIN EN ISO 4957-2018

Grade	X40Cr 14
Germany W-Nr.	1.2083
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.6 g/cm³

X40Cr 14 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.36	-	-	-	-	12.5
Maximum Value	0.42	1	1	0.03	0.03	14.5

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

X40Cr 14 Mechanical Properties

	Hardness HBW
Quenching and Tempering	HRC ≥52
Annealed (+A)	≤241
Preheat Treatment	300

1 Approximate Comparison Table

China		Japan	International Organization for Standardization	Germany		Sweden
GB	ISC	JIS	ISO	DIN EN/DIN	W-Nr.	SS
4Cr13	S42043	SUS 420J2	X39Cr13	X40Cr13	1.2083	2304

2 Approximate Comparison Table Alloy cold-work tool steel

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
X40Cr14	X40Cr14	1.2083	X40Cr14	1.2083

X40Cr14 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	X40Cr 14 1.2083
2	ISO 4957-2018
	X40Cr 14 1.2083
3	NF A 35-590-1992
	X40Cr14 (Z40C14)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!