X210CrW 12 1.2436 - DIN EN ISO 4957-2018

Grade	X210CrW 12
Germany W-Nr.	1.2436
Corresponding Standard	DIN EN ISO 4957-2018 Tool steels
Classification	Alloy Steel
Density	7.6 g/cm³

X210CrW 12 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	W
Minimum Value	2	0.1	0.3	-	-	11	0.6
Maximum Value	2.3	0.4	0.6	0.03	0.03	13	0.8

• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.

X210CrW 12 Mechanical Properties

	Hardness HBW
Quenching and Tempering	HR ≥62
Annealed (+A)	HB ≤255

1 Approximate Comparison Table Alloy Cold-Work Tool Steel

International Organization for Standardization	Germany		European Standard
ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
X210CrW12	X210CrW12	1.2436	X210CrW12	1.2436

2 Approximate Comparison Table Alloy Cold-Work Tool Steel

International Organization for Standardization	Germany	France	European Standard		Sweden
ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	SS
X210CrW12	X210CrW12	X210CrW12-1	X210CrW12	1.2436	2313

3 Approximate Comparison Table Alloy Tool Steel 2

China	Japan	United States	Germany		France	Russia	United Kingdom
GB	JIS	ASTM	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
Cr12	SKD 1	D3	X210Cr12	1.2436	Z200C12	12	BD3

X210CrW12 Corresponding Standards(Same grade name, different standards)

1	DIN EN ISO 4957-2018
	X210CrW 12 1.2436
2	DIN 17350-1980
	X210CrW 12 1.2436
3	ISO 4957-2018
	X210CrW 12 1.2436

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!