中文版
Home Material DIN EN ISO 4957-2018
简体 | 繁體
Grade X210Cr 12
Germany W-Nr. 1.2080
Corresponding Standard DIN EN ISO 4957-2018
Tool steels
Classification Alloy Steel
Properties Hardness Quench Hardness
Density 7.6 g/cm3
X210Cr 12 Chemical Element Composition Content (%)
Component C Si Mn P S Cr
Minimum Value 1.9 0.1 0.2 - - 11
Maximum Value 2.2 0.6 0.6 0.03 0.03 13
• Elements not quoted in this table shall not be intentionally added to the steel without the agreement of the purchaser, other than for the purpose of finishing the heat . All reasonable precautions shall be taken to prevent the addition from scrap or other material used in the manufacture, of such elements which affect the hardenability, mechanical properties and applicability.
X210Cr 12 Mechanical Properties
Hardness
HBW
Annealed (+A) ≤248
Quenching and Tempering HRC
≥62
1 Approximate Comparison Table Alloy Cold-Work Tool Steel
International Organization for Standardization Germany European Standard
ISO DIN EN/DIN W-Nr. EN Numerical Grade
X210Cr12 X210Cr12 1.2080 X210Cr12 1.2080
2 Approximate Comparison Table Alloy Cold-Work Tool Steel
China Japan International Organization for Standardization Germany France European Standard Russia United Kingdom
GB JIS ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST BS EN/BS
Cr12 SKD1 X210Cr12 X210Cr12 Z200C12 X210Cr12 1.2080 KH12 BD3
3 Approximate Comparison Table Alloy Tool Steel
Japan United States Germany France United Kingdom
JIS ASTM/AISI DIN EN/DIN NF EN/NF BS EN/BS
SKD1 D3 X210Cr12 Z200C12 BD3
4 Approximate Comparison Table Alloy Tool Steel
China Japan South Korea United States International Organization for Standardization Germany United Kingdom
GB JIS KS ASTM/AISI ISO DIN EN/DIN BS EN/BS
Cr12 SKD1 STD1 STD1 210Cr12 X210Cr12 STD1
5 Approximate Comparison Table Alloy Tool Steel 1
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France Russia United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF GOST BS EN/BS
Cr12 T21200 SKD 1 SKD 1 STD 1 D3 T30403 X210Cr12 X210Cr12 1.2080 X210Cr12
X200Cr12 		Х12 X210Cr12
BD3
6 Approximate Comparison Table Alloy Tool Steel 2
China Japan United States Germany France Russia United Kingdom
GB JIS ASTM DIN EN/DIN W-Nr. NF EN/NF GOST BS EN/BS
Cr12 SKD 1 D3 X210Cr12 1.2436 Z200C12 12 BD3
X210Cr12 Corresponding Standards(Same grade name, different standards)
1 DIN EN ISO 4957-2018
X210Cr 12 1.2080
2 DIN 17350-1980
X210Cr12 1.2080
3 ISO 4957-2018
X210Cr 12 1.2080

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!