F593 303 Se S30323 - ASTM F593-2017

Grade	F593 303 Se
USA UNS	S30323
Corresponding Standard	ASTM F593-2017 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
Classification	Austenitic Stainless Steel

F593 303 Se Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Se
Minimum Value	-	-	-	-	-	17	8	0.15
Maximum Value	0.15	1	2	0.2	0.06	19	10	-

F593 303 Se Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Hardness HBW
1/4 ~ 1-1/2 (Full-Size)	AF	65~85	≥20		HR（B85 max）
1/4 ~ 1-1/2 (Full-Size)	A	75~100	≥30		HR (B65~95)
1/4 ~ 5/8 (Full-Size)	CW1	100~150	≥65		HR (B95~C32)
3/4 ~ 1-1/2 (Full-Size)	CW2	85~140	≥45		HR (B80~C32)
1/4 ~ 5/8 (Full-Size)	SH1	120~160	≥95		HR (C24~C36)
3/4 ~ 1 (Full-Size)	SH2	110~150	≥75		HR (C20~C32)
1-1/8 ~ 1-1/4 (Full-Size)	SH3	100~140	≥60		HR (B95~C30)
1-3/8 ~ 1-1/2 (Full-Size)	SH4	95~130	≥45		HR (B90~C28)
1/4 ~ 1-1/2 (Machined)	AF	≥60	≥20	≥40
1/4 ~ 1-1/2 (Machined)	A	≥70	≥30	≥30
1/4 ~ 5/8 (Machined)	CW1	≥95	≥60	≥20
3/4 ~ 1-1/2 (Machined)	CW2	≥80	≥40	≥25
1/4 ~ 5/8 (Machined)	SH1	≥115	≥90	≥12
3/4 ~ 1 (Machined)	SH2	≥105	≥70	≥15
1-1/8 ~ 1-1/4 (Machined)	SH3	≥95	≥55	≥20
1-3/8 ~ 1-1/2 (Machined)	SH4	≥90	≥40	≥28

1 Approximate Comparison Table Austenitic Stainless Steel

2 Approximate Comparison Table Austenitic Stainless Steel

China		Japan	United States	International Organization for Standardization		European Standard
GB	ISC	JIS	UNS	ISO	Numerical Grade	Numerical Grade
Y12Cr18Ni9Se	S30327	SUS303Se	S30323	X12CrNiSe18-9	4625-303-23-X	1.4625

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!