F468P Cu 710 C71000 - ASTM F468-2012

Grade	F468P Cu 710
USA UNS	C71000
Corresponding Standard	ASTM F468-2012 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
Classification	Copper and Copper Alloys

F468P Cu 710 Chemical Element Composition Content (%)

Component	Fe	Mn	Ni	Cu ^①	Pb	Zn
Minimum Value	-	-	19	74	-	-
Maximum Value	0.6	1	23	-	0.05	1

① Minimum content of copper plus all other elements with specified limits shall be 99.5 %.

F468P Cu 710 Mechanical Properties

Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %	Hardness HBW
45~75	≥15	≥40	HRB 50~85

Approximate Comparison Table Wrought Cupronickel

China		Japan	United States		International Organization for Standardization		France	Russia	United Kingdom
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	GOST	Commercial Grade	BS EN/BS
B19	T71050	C7101 C71000	80Cu-20Ni	C71000	CuNi20	C71000	CuNi20 C71000	МН19	CN104	C71000

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!